Applications / HEALTHY & SAFETY

Safety shouldn't depend on someone being in the right place at the time

When defect rates spike, quality engineers spend hours digging through SCADA, ERP, MES, and maintenance logs to find out what changed. Loopr's AI agent does that investigation in minutes, then hands engineers a ranked list of likely causes with the evidence behind each one.

Request a Demo
Start A Pilot
Total Audience
15.290
Why continuous monitoring
Most incidents begin as small signals
Signals, not incidents — yet
A missing helmet
A worker crossing into a restricted zone
A forklift moving too fast
Smoke that's barely visible
A slow oil leak on critical equipment
Someone working at height without a harness
Each one is on its way to becoming an injury, an outage, or an environmental event.
Signal
→
Near miss
→
Incident
Whether it gets caught depends entirely on someone happening to look.
Eyes don't scale
Inspection rounds happen on schedules; hazards don't. The areas with the least coverage — night shifts, remote locations, hazardous environments — are often where risks build the fastest.
How Loopr works

Continuous Monitoringacross your operations.

Loopr watches continuously across every connected camera, standard or thermal, for the hazards your team defines. The moment something is detected, it generates a timestamped alert with visual evidence and routes it to the right people. Loopr identifies the risk. Your team makes the decision.

Detect

Continuously monitor equipment, work areas, and production zones across every shift.

Alert

Notify the right teams instantly with visual evidence and configurable alert rules.

Respond

Enable faster, informed action while keeping engineers and safety teams in control.

The platform
One platform for continuous safety intelligence
Protect your people
PPE compliance
Detect missing or incorrect protective equipment, including hard hats, safety glasses, vests, and boots, with alerts the moment required PPE is missing.
Working at heights
Detect workers at height and verify safety harness presence, with immediate alerts when protection is missing.
Lifting operations
Detect people or objects near suspended loads and trigger alerts on unsafe configurations.
Restricted zone monitoring
Identify unauthorized entry into hazardous or controlled areas and monitor worker presence within restricted zones.
Fall & incident detection
Monitor for worker safety incidents such as falls or accidents, so response begins immediately.
Protect your operations
Vehicle monitoring
Detect trucks and forklifts in real time and trigger alerts on unsafe speed within the facility.
Environmental hazards
Detect fire, smoke, and spills on floors and surfaces, with detection rules tuned to minimize false alarms.
Leak detection
Identify leaks on critical assets using thermal cameras before they become costly failures.
Proven in the field
Deployed on live production floors
Both deployments run on the cameras already installed — no new hardware, no rip-and-replace.
Facility-wide monitoring visual — multi-zone camera view
Large manufacturer
Full-facility safety monitoring
Loopr deployed as a facility-wide AI safety system covering lifting operations, working at heights, PPE compliance, vehicle monitoring, environmental hazards, and restricted zones — all running simultaneously with real-time alerts.
Lifting operations
Working at heights
PPE
Vehicles
Restricted zones
What changed
Safety monitoring moved from periodic checks to continuous, always-on coverage across the facility.
Thermal detection visual — leak signature on a critical asset
Utilities operator
Continuous leak detection
Scheduled inspection rounds left long gaps between checks. Delays in identification and response led to equipment damage, environmental contamination, and unplanned downtime.
With Loopr and thermal cameras, leak detection is now continuous. Maintenance teams receive timestamped alerts with visual evidence, allowing them to respond before leaks become critical.
The outcome
Earlier detection of equipment issues, timestamped alerts with visual proof, and tuned thresholds that minimize false alarms.
Why teams choose Loopr
Built to be trusted on the floor
Six properties that decide whether a safety system gets used — or gets ignored.
Continuous coverage
Monitor every connected camera, every shift, without fatigue or gaps in coverage.
Real-time response
Detections and alerts in real time, while intervention is still possible.
Hardware agnostic
Deploy using your existing standard or thermal cameras without proprietary hardware.
Human-led decisions
Loopr surfaces risks with supporting evidence while your team remains in control of every response.
High signal, low noise
Configurable detection thresholds reduce unnecessary alerts while prioritizing meaningful events.
Complete traceability
Every detection is timestamped, recorded, and supported with visual evidence for audits and investigations.
The pilot
From pilot to production in four weeks
A pilot starts on one workflow close to a proven deployment, then expands once it holds.
Week 1
Scope and capture
Pick the highest-value workflow, define the checks against the BOM, and capture production footage on your line. No fixed rig to install.
Week 2
Train and tune
Build and tune the model on real footage from your environment, including the angles and lighting that break static-image systems.
Week 3
Run alongside operators
Deploy on the tablet in shadow mode next to your current process, measure agreement, and refine on edge cases.
Week 4
Validate and plan scale
Confirm performance, connect to your MES, and map the next workflows to add.

Begin Your Quality Intelligence Journey

Explore how Loopr fits into your manufacturing environment or validate impact on a critical inspection in four weeks.

Contact UsStart a Vision AI Pilot